Putting The Room Thermostat Into Stand-By Mode - Intermatic Grasslin thermio essential H Srf Manual De Instrucciones

4. Once you have set the temperature setpoint, wait five seconds until the setpoint stops flashing.
ð The device activates the heating system and the room temperature is adjusted to the tem-
perature setpoint.

PUTTING THE ROOM THERMOSTAT INTO STAND-BY MODE

Personal:
• User
1. Press the toggle key (Fig. 1/1) up or down to put the device in stand-by mode.
The toggle key returns to its starting position.
ð
Setting the temperature setpoint to a higher value does not make
the room heat up more quickly. The heating rate is determined by
the conditions in the heating system only.
EN
73