Setting Up And Using The Perfect Mamatens; Installation Of Batteries - TensCare perfect mamaTENS Manual Del Usuario

KEYPAD LOCK
The button marked
the LOCK button, it can be
used to lock the keypad.
This is to avoid accidental changes in
setting. To lock the controls, press and
hold the LOCK button down for 3
seconds. will appear on the LCD
screen and none of the controls will be
working except for the ▼ button. Press
and hold to unlock.
BOOST BUTTON
On the side of the unit there is a
BOOST button.
depends upon the programme
selected and is detailed within the
section 7.
LOW BATTERY
An empty battery symbol will
show when you need to
change the batteries. The unit
will shut down about 2 minutes after
this.
OPEN CIRCUIT CUTOUT
If the perfect mamaTENS is not
correctly connected to your body, the
strength will automatically reset to zero.
This is to prevent sudden changes if a
broken connection is re-made.
11. SETTING UP AND
is
11.1. INSTALLATION OF
1) Remove belt clip by sliding down.
2) Remove battery cover by pulling on
Its action
tag.
3) Insert batteries.
Ensure that the batteries are inserted
the right way as shown in battery
compartment and that the ribbon is
behind them.
4) Replace battery cover and belt clip.
screen and it is important to change the
batteries as soon as possible.
Rechargeable batteries
Do not use rechargeable batteries.
They have a lower voltage and may
activate the low battery cut-out.
16
USING THE PERFECT
MAMATENS
BATTERIES
When the batteries are
running low, a low battery
indicator will show on the