Vaisala Indigo 202 Guía Rápida página 9

1.5 Opening and Mounting
CAUTION! To avoid damaging the connector pins of the transmitter, pull the
transmitter cover off the base in a straight angle. Do not twist or bend.
1. Loosen the 4 screws on the transmitter cover.
2. Carefully open the transmitter cover part of the way from both sides so it is easier to
pull the cover off the base.
3. Pull the transmitter cover off the base in a straight angle. Do not twist or bend.
4. Place the transmitter base on the installation surface and mount it with 3 screws. See
the screw positions in
5. Lead the input/output cable inside the transmitter (see
are wiring through the lead-through on the bottom of the transmitter, test that the
strain relief works with your cable.
6. Connect the input/output cable's wiring to the screw terminals (see
Base (page 10)) and reattach the cover when done.
Figure 4 (page 10).
Chapter – Indigo 202 Quick Guide
Wiring Options (page 8)). If you
Indigo Transmitter
9