Cleaning And Maintenance; Environment Protection - Eldom Rast PR300 Manual Del Usuario

NOTE:
When the door (2) is opened, hot steam may escape from the interior.
- Use kitchen gloves and the appropriate handles (12, 14) to remove the food.
- After the set time has elapsed, a sound signal will be heard and the appliance will switch off.
- When cooking is finished, turn the knob (8) to the "OFF" position and disconnect the appliance from the mains.
TIPS
- A maximum of 3.5 kg can be placed on the grill (10) and the plate (11), and a maximum of 2.5 kg on the rotisserie
(13), but the products must not come into contact with the walls, the door or the heating elements.
- Products must be distributed evenly.
- The baking time should be adapted to the size, type and initial temperature of the products.
- Consecutive portions of the same food can be cooked faster due to the warming up of the interior.

CLEANING AND MAINTENANCE

- Turn the knobs (6, 8, 9) to the left as far as possible before cleaning the appliance, disconnect it from the power
supply and let it cool down.
- Do not use sharp-edged or sharp objects to clean the appliance, as they may damage functional parts or
compromise the safety of the unit.
- All moving parts should be washed with warm water and washing-up liquid. It is best to wash them directly
after use. After rinsing with clean water, they must be dried immediately.
- Never immerse the body (4) in water or wash under running water. Clean the body (4) and the heating chamber
(3) with a damp cloth.
- If it is difficult to wash the grill (10), plate (11) and rotisserie (13), they can be immersed in hot water with
washing-up liquid and left for a few minutes.
- The dishwasher can be used to clean elements (10, 11, 12, 13, 14).
BULB REPLACEMENT IN THE OVEN CHAMBER
If the bulb in the oven chamber burns out, replace it with a bulb of the same type.
The bulb must be heat-resistant. It can be purchased in the maintenance shop or in
a specialist shop. Do not use other types of bulbs.
- Turn the knobs (6, 8, 9) to the left as far as possible before putting the product
away, disconnect the appliance from the power supply and let it cool down.
- Remove the cover and then the bulb fig.1.
- Screw in the new bulb of the same type, and then screw in the cover.
STORAGE
- Turn the knobs (6, 8, 9) to the left as far as possible before putting the product away, disconnect it from the
power supply and let it cool down.
- Never put the appliance away when it is hot or still plugged in to the power supply.
- Clean the appliance and all its components.
- Store the oven in the box (preferably the original one) in a clean and dry place.
- Do not wrap the cable around the appliance. Do not tighten the cable, as this may weaken or tear the cable.

ENVIRONMENT PROTECTION

- The device is made of materials which can be reused or recycled.
- The device should be handled to a special point which deals with collecting and recycling of electric and
electronic equipment.
14