T&S Safe-T-Link Instrucciones De Instalación Y Mantenimiento página 7

General Instructions
Gas Supply Side
1. If pipe tee is already male, apply Tefl on Tape or pipe joint compound to pipe threads at
gas supply line. Thread no.7 valve onto male pipe nipple and tighten.
2. If pipe tee is female, fi rst apply Tefl on Tape to threads of pipe (not supplied) and thread
pipe nipple into female pipe tee. Then thread no.7 valve onto pipe nipple and tighten.
3. Apply Tefl on Tape or pipe joint compound to thread of no.2 fi tting. Place no.2 fi tting
into no.7 valve and tighten.
Installation Comparison
Wrong Right
Right
Wrong
Wrong
Wrong Right Wrong
Right
Appliance Side without Quick Disconnect or Quick Disconnect Valve (Safe*T*Guard)
1. Apply Tefl on Tape or pipe joint compound to male stub-out on appliance and thread
female/female elbow to male stub-out.
2. Thread male end of no.2 on no.5 or no.6 and attach to stub-out of appliance and
tighten.
Appliance Side with Quick Disconnect or Quick Disconnect Valve (Safe*T*Guard)
1. Apply Tefl on Tape or pipe joint compound to male stub-out on appliance and thread
no.5 (male/female elbow) to male stub-out.
2. Separate no.9 coupling nipple (male) half from no.10 coupling (female) half. Apply
Tefl on Tape or pipe joint compound to male threads on no.5 (male/female elbow).
3. Thread no.9 of no.8a or 8b onto male elbow at appliance and tighten.
4. Reconnect no.8a or 8b coupling assembly to nipple.
Finishing
See Section on page 6.
7