Activation; Connection Inside The Vehicle - PAJ CARFINDER2.0 Manual De Instrucciones


ISO 14230-4 KWP (fast init, 10.4 kbaud)

ISO 15765-4 CAN (11 bit ID, 250 kbaud)

ISO 15765-4 CAN (11 bit ID, 500 kbaud)

ISO 15765-4 CAN (29 bit ID, 250 kbaud)

ISO 15765-4 CAN (29 bit ID, 500 kbaud)

2.4 Activation

Note: To activate you need the device ID. Please make a note
In order to use PAJ's CAR Finder 2.0, it must first be activated
online.
To do this, please go to
www.start.finder-portal.com
and follow the instructions.

2.5 Connection inside the vehicle

The following points must be observed by all means
The CAR Finder 2.0 should not be installed near fuel lines or
other combustible components in the engine compartment.
When mounting the CAR Finder 2.0, please make sure that
no other components in the vehicle are damaged.
Installing the CAR Finder 2.0 may discharge your vehicle
battery. Before connecting, check whether your vehicle has
a discharge protection and retrofit it if necessary.
Please always observe the manufacturer's specifications
for your vehicle. Compensation claims due to incorrect
connections are hereby excluded
before installing your FINDER.
CAR Finder 2.0 by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
18