Top & Bottom Cover Removal Instructions; Top Cover Removal; Bottom Cover Removal - Parker AC30 Serie Manual Del Usuario

English
Top & Bottom Cover Removal Instructions
WARNING Isolate supply and ensure residual energy is discharged before removing the terminal covers.

Top Cover Removal

The top terminal cover will need to be removed in order to connect the DC link input cables or brake cables to the
inverter:
Frame D:
1. Remove the control module.
2. Squeeze the bracket.
3. Slide the cover up to remove.
Frames K - N:
1. Unscrew the fixings to remove.
On the Frame K only, the front panel must be
removed first.

Bottom Cover Removal

The bottom terminal cover will need to be removed prior to connecting any AC line input cables to or motor output cables
from the inverter:
Frames D – J:
1. Insert a screwdriver into the slot.
2. Push to the left to release the catch
3. Slide the cover up to remove.
1-6
Frames E - J:
1. Insert a screwdriver into the slot.
2. Push to the right to release the catch.
3. Slide the cover up to remove.
Frames K – N:
1. Unscrew the fixings to remove.