Teamtex mig PLUTO Manual Del Usuario página 9

EN
Height100-150cm
•
Remove the belt system as described above
1
in these instructions.
•
Press the two lateral Isofix connector buttons
2
in order to extend the Isofix connectors to
their full length.
•
Place the child seat on the seat of the vehicle.
•
Insert the Isofix connectors into the insertion
aids and press until they lock.
•
The display on both sides only turns green
when the connections have been estab-
lished. Pull the child car seat to the back rest
until it is standing securely.
•
In order to loosen the Top-Tether, press the
3
grey adjustment button with one hand and
pull the side of the belt anchor to the required
length with your other hand.
•
Fix the anchor to the fixation point on the
back of the car seat.
•
Pull the Top-Tether tight by pulling on the
other side of the belt. Make sure that the
display is green.
•
Put the child in the child car seat.
4
•
Adjust the height of the head support so
that the belt guide remains free at the head
support.
•
Insert the safety belt of the car through the
belt guide under the head support of the
child car seat.
•
Ensure the pelvic restraint is positioned as
follows:
Height100-125cm
4a
•
Please make sure that the diagonal belt is
positioned above the armrests.
•
The pelvic restraint is guided underneath
the armrests.
- 16 -
A
B
C
Height120-150cm
4b
•
The diagonal belt as well as the pelvic restraint
are guided underneath the armrests.
•
Please make sure that in particular the pelvic
5
restraint is close fitting and is as low as possible
over the pelvis of the child.
•
Close the 3-point safety belt with the buckle
on the car seat. Make sure that the 3-point
safety belt is not twisted.
•
Pull the 3-point safety belt of the vehicle
as tight as possible and check whether the
child car seat is standing securely.
CLEANING
This product has been developed taking into account safety, comfort and functionality. Please
take the time to read these instructions carefully before using the product and store them in a
safe place for future reference.
In order to guarantee long usage of your child car seat, do not use any solvents, abrasives
or aggressive cleaning agents. Check the stability of the fabric and of the seams after each
wash. When washing the fabric, the instructions on the label (see below) are to be carefully
complied with.
Wash at 30°C,
30
delicate wash
Do NOT bleach 30
30
Tumble dry at low
30
temperature
MAINTENANCE
Regularly check the condition of the product for possible damage. In case of damage, do not
use and keep out of the reach of children.
If you have any problems, please contact TeamTexCustomerServiceat+33(04)72469898.
TeamTex
Rue de Claret
38230Charvieu
France
- 17 -
30 Do NOT iron
Do NOT clean chemically
EN