Bissell POWERTRAK 2598 Serie Guia Del Usuario página 7

Empty Dirt Tank
WARNING
connect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
1
Empty once tank is full.
Clean Tank & Cyclone
1
Remove the Dirt
Tank and twist
its top counter-
clockwise to
unlock and pull
up to separate.
3
Align tabs on
Cyclone assembly
with tank to replace.
NOTE: Let parts dry completely before returning them to vacuum for use.
To reduce the risk of electrical shock, turn Power Switch OFF and dis-
2
Press the release button at
the top of the Dirt Tank to
remove it from the vacuum.
2
4
Place the top back on
the Dirt Tank by aligning
the tab, then twist
clockwise to lock.
3
Hold Dirt Tank over a trash
container and push the
empty release button located
on the lower backside of the
Dirt Tank. Close lid and return
tank to vacuum base.
Grab the top of the Cyclone
assembly to remove. Clean
with warm water and mild
detergent. Wipe inside of
tank with a damp cloth.
Do not reassemble until
completely dry.
5
click
Return the fully assembled
tank to the vacuum base
and press firmly until you
hear a "click".
www.BISSELL.com
7