WccSolar SUN3.5-5K Manual Del Usuario página 13

Tabla de contenido

Publicidad

compatibility requirements. Before leaving the factory,all inverters have
had a rigorous testing to ensure the long time
If a fault occurs, LCD and LED will be prompted show
fault information.Under the condition of alarm, inverter
may stop power.The fault table are shown in table 7.1
below:
Safety hints:
If your SUN – 5k string type inverter appeared any
fault information as shown in table 8-1, and after the
restart still not eliminate the fault, please contact your
local dealer or service center.You need to prepare the
following information.:
1. Inverter serial number.
2. Inverter distributor or service centre (if any);
3. Date of start grid tie.
4. Description (including fault code displayed on the LCD and light) in
detail as much as possible.
5. Your contact details
In order to make you more clear understanding of the inverter fault
information, We put all fault code and instructions in below table
the inverter is not normal working.
Fault information
F01
F02
F03
211
reliable operation.
when
Instruction
Dc input polarity reverse fault
Dc insulation impedance permanent fault
Dc leakage current fault
F04
Ground fault GFID (battery end grounding)
F05
Read the memory error
F06
Write the memory error
F07
GFDI Blown Fuse
F08
GFDI Grounding contact failure
F09
IGBT damage by excessive drop voltage
F10
Auxiliary switch power supply failure
F11
Ac main contactor errors
F12
Ac auxiliary contactor errors
F13
reserved
F14
DC firmware over current malfunction
F15
AC firmware over current malfunction
F16
GFCI(RCD) Ac leakage current fault
F17
Three phase current,over-current fault
F18
AC over current fault of hardware
F19
All hardware failure synthesis
F20
DC over current fault of the hardware
F21
Dc leakage flow fault
F22
Crash stop (if there is a stop button)
Ac leakage current is transient over
F23
current
F24
Dc insulation impedance failure
F25
Dc reverse irrigation failure
F26
The dc bus is unbalanced
F27
Dc end insulation error
F28
Inverter 1 dc high fault
F29
Ac load switch failure
F30
Ac main contactor failure
F31
Ac secondary contactor failure
22

Publicidad

Tabla de contenido
loading

Tabla de contenido