Clothing And Equipment - Kruger K100 Instrucciones Para El Uso

The functional overpressure and maximum tempera-
ture admitted, as well as the date of construction are
printed on the high pressure pipe covering.
Use only slightly alkaline detergents (Ph 9.1, 1%
solution), that are over 90% biodegradable.
As concerns water connection, refer to the regulations
of the individual countries.
The constructor will not accept liability for any damage
to people, animals or things as the result of improper,
incorrect or unreasonable use, or use which does not
comply with the above indications.
The water cleaner must not be used by children or
untrained persons.
Use only flexible hosing, accessories and fittings
recommended by the manufacturer. Do not use the
appliance in the event of any damage to the power
cable or other parts such as piping and fitting.
IMPORTANT : Use only original Spare Parts

CLOTHING AND EQUIPMENT

Always wear anti-slip sole
footwear.
Wear protective goggles or
visor and safety wear.
It is advisable to wear work overalls in order to reduce
the risk of injury in the event of accidental contact with
a high pressure jet.
FIELDS OF APPLICATION
The high pressure water cleaner has been developed
for washing vehicles, machines, containers, façades,
stables and for removing rust without generating dust
or sparks.
During cleaning, ensure that no dangerous substances
of the object to be cleaned are dispersed into the
environment (such as asbestos, oil for example).
Carefully follow disposal instructions.
Do not treat concrete-asbestos surfaces with high
pressure jets. As it may cause the detachment of
dangerous asbestos fibres as well as dirt, detrimental
to the lungs.
The risk exists particularly after the drying of a surface
treated with a water jet or steam.
Do not clean delicate components made of rubber,
fabric or similar materials with a multi-directional jet.
When cleaning with a high pressure, flat jet, keep the
nozzle at a minimum distance of 15 cm.
.
STARTING UP, OPERATIONAL ADVICE
The trigger of the spray gun must
function smoothly and return to
initial position, after release.
Check the functional conditions of the appliance
before the start of each operation.
The mains cable and the plug, the high pressure pipe
with spraying device and the safety devices are
particularly important.
Keep children and animals clear when the appliance
is operating.
Do not ever wash the
appliance or other electrical
appliances with a water jet.
Short circuit danger !
Check that there is sufficient air circulation in the
motor ventilation zone.
Do not cover the appliance, ensure that there is sufficient
motor ventilation.
Position the high pressure cleaner as far away as
possible from the object to be sprayed.
Do not damage the mains attachment cable by
treading on it, squashing or pulling it, etc.Do not
detach the plug from the socket by pulling the
connection wire, but pull out the plug.
Make sure hands are dry before touching the plug
and the connection cable.
Hold the spraying device with both hands in order to
properly absorb the reaction force and the additional
torque in the case of spraying device with an inclined
spraying pipe. Always assume a safe and secure
position.
Before undertaking any
work on the appliance
always detachthe plug from
the power socket.
10