Swing-N-Slide Pine Bluff Instrucciones De Montaje página 16

PineBluff ssembly Instructions
Fig. 9
T-nut
Fig. 10
Washer
2-1/2'' screws
Hex Bolt
3-1/2'' Hex Bolt
2-1/2'' Wood Screw
A-Frame Assembly cont.
1. Attach A-Frame to Swing Beam using (2) hex bolts and 4 screws as shown in (Fig. 9).
2. Tighten hex bolt to flush with top of T-nut. Repeat on second bracket.
3. Repeat steps 1 & 2 to attach Swing Beam Assembly to the Deck, as shown in (Fig. 10).
16