General Safety Precautions - Warn PN 76080 Manual Del Usuario

FCC and IndustryCanada(IC) Warning:
• This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• The term "IC:" before the radio certification number only signifies that
industry Canada technical specifications were met.
• Any changes or modifications to this product not expressly approved by
WARN Industries could void the user's authority to operate this product.

GENERAL SAFETY PRECAUTIONS

As you read these instructions, you will see
WARNINGS, CAUTIONS, NOTICES and NOTES.
Each message has a specific purpose. WARNINGS
are safety messages that indicate a potentially
hazardous situation, which, if not avoided could result
in serious injury. CAUTIONS are safety messages that
indicate a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. A
CAUTION may also be used to alert against unsafe
practice. CAUTIONS and WARNINGS identify the
hazard, indicate how to avoid hazard, and advise of
the probable consequence of not avoiding the hazard.
NOTICES are messages to avoid property damage.
NOTES are additional information to help you
complete a procedure. PLEASE WORK SAFELY!
WA R N I N G
MOVING PARTS ENTANGLEMENT
HAZARD
Failure to observe these instructions
could lead to severe injury or death.
To avoid injury to hands or fingers.
• Always keep hands clear of rope, hook
loop, hook and fairlead opening during
installation, operation, and when spooling
in or out.
• Always use extreme caution when handling
hook and rope during spooling
operations.
• Always use supplied hook strap whenever
spooling rope in or out, during
installation and during operation.
• Always keep vehicle in sight during
winching operation.
• Always wear heavy leather gloves when
handling rope.
WA R N I N G
CHEMICAL AND FIRE HAZARD
Failure to observe these instructions
could lead to severe injury or death.
• Always remove jewelry and wear eye
protection.
• Never lean over battery while making
connections.
• Always verify area is clear of fuel lines,
fuel tank, brake lines, electrical wires, etc.
when drilling.
• Never route electrical cables:
- Across any sharp edges.
- Through or near moving parts.
- Near parts that become hot.
• Always insulate and protect all exposed
wiring and electrical terminals.
• Always install terminal boots as directed
in installation instructions.
WA R N I N G
FALLING OR CRUSHING HAZARD
Failure to observe these instructions
could lead to severe injury or death.
• Never use winch to lift or move persons.
• Never use winch as a hoist or to suspend a
load.
WARN Wireless Control Installation Guide 1