Step 3
Turn four BLACK 9/16" FLAT HEAD SCREWS (32S) into the
å
other surfaces of the ENDS (A and B) until the shoulders of
the SCREWS rest on the surfaces of the ENDS.
Slide the SIDE MOLDINGS (P) onto the ENDS (A and B).
å
Line up the grooves in the MOLDINGS over the heads of
the SCREWS in the ENDS.
P
Page 8
B
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
A
Shoulder
32S
409936
P
www.sauder.com/services