Important; Hob Appearance - Jocel JP4EV010100 Manual De Instruciones

IMPORTANT

Disconnect the mains supply before doing this. A good earth connection necessary and a switch for
disconnecting all the phases must be placed accessibly, with a minimum distance of 3 mm between
contacts.
If this is not done as stipulated above, the manufacture will not be liable for any damage that may be caused.
This appliance is equipped with a power cable for high temperatures. If the supply cable needs replacing for
any reason, this must be done by a technician
5. Finally fix the appliance
Fix the hob on the table by screw four brackets on the bottom of hob (see picture) after installation. Adjust
the bracket position to suit for different table top thickness.

HOB APPEARANCE

Se below the maximum power of each heating zone.
Heating zone
The above power may vary if the material or the size of pot is different.
1ª
2ª
3ª
4a
Screw
Bracket
Base
Size
mm
ø180mm
ø145mm
ø180mm
ø145mm
-32-
Screw Hole
Power
(W)
1800W
1200W
1800W
1200W