Shematic Diagram Of The Control Panel; Start Using Your Appliance; Using The Ceramic Hob - Jocel JP4EV010100 Manual De Instruciones

SHEMATIC DIAGRAM OF THE CONTROL PANEL

All operations are performed by means of the touch controls that can be found
on the control panel.
1. Safety lock button
2. Minutes button
3. Cooking zone selection buttons (x4)
4. Plus button
5. Safety lock activated LED
6. Timer display
7. Timer button
8. Zone timer activated LED (x4)
9. Zone temperature display (x4)

USING THE CERAMIC HOB

Switching the hob top on and off

Press a zone selection button (3) to switch on the appliance and the selected heating zone.

Pressing the zone selection button twice in quick succession will turn the corresponding heating zone off.
If it is the only active heating zone, the whole hob will be turned off as well.
Switching on a zone and setting a power level
Switching off a zone

Pressing the zone selection button again within a few seconds will turn the corresponding heating zone
off. If it is the only active heating zone, the whole hob will be turned off as well.

The letter "H" will show in the cooking zone indicator (3), (see the section on the "residual heat indicator"
on the next page).

Press the cooking zone selection button (3) of the zone that you want
to use.

Adjust the zone between power levels 1 and 9, using the plus (4) and
minus (2) buttons. The value on the zone indicator (9) will adjust up or
down.

Press the cooking zone selection button (3) of the zone that you want
to switch off.
-33-