Installing The Camera; Disassembling The Device - Ezviz C4S Guia De Inicio Rapido

Step 3

Installing the Camera

• Make sure the wall is strong enough to withstand three times the weight of the camera and
the mounting.
• Do not tear off the protetive film on the camera untill the installation is finished.
1

Disassembling the Device

According to the pictures below, remove black decorative parts, front cover and inner cover in
order and insert the micro SD card in the card slot.
Find the OPEN mark on the trim ring. Lift the lock
near the mark to take off the trim ring.
Remove the inner cover.
Loosen the three screws on the front cover using
Allen wrench and take off the front cover.
Insert the microSD card into the card slot if
you want to record the event video inside the
microSD card. (Optional)
3