Data Logger - WEBTEC HPM7000 Manual De Instrucciones

Operation
6.5.2

Data Logger

The Data logger measuring method starts recording of the measured
values by tapping on the Start/Stop button.
Recording is stopped after a defined storage time has elapsed or by
tapping on the Start/Stop button.
After selecting the Data logger measuring method, the device displays
predefined parameters to complete the measurement.
1 Tap on the
Ä The configuration window opens in which to define the
parameters.
2 Define the values according to your application.
The following settings are available to be defined:
Designation
Storage interval
Storage time
Ring buffer
Recording MIN/MAX
68
button.
Description
Set the storage interval of the measurement
in the format h : m : s : ms
Set the storage time for the measurement
in the format d : h : m : s When the storage
time has expired, the measurement stops
automatically
If this option is activated, the defined memo-
ry area is continuously overwritten by current
measured data
If this option is activated, the Min and Max
measured values are also recorded in addi-
tion to the current measured value