Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
5. Attach the left door (I) to the left front support
(G) and the right door (J) to the right front
support (L) using four M5x45mm bolts (CC)
and four M5 Locknuts (DD). Tighten with a
screwdriver and the wrench (EE).
Hardware Used
CC
M5x45mm Bolt
DD
M5 Locknut
EE
Wrench
Phillips Screwdriver
(not included)
6. Attach the chimney (A) to the top cover (B)
using four M6x12mm bolts (AA) and four
M6 nuts (BB). Use a phillips screwdriver
and the wrench (EE) to tighten.
Hardware Used
AA
M6x12mm Bolt
BB
M6 Nut
EE
Wrench
Phillips Screwdriver
(not included)
7. Insert the wood grate (H) into the bottom
base. If you have model # OFW577HC, insert
the cooking grid (F) into the brackets of the
four posts. For all units, attach the top cover
(B) to the back supports (C), left front support
(G), and right front support (L) using eight
M6x12mm bolts (AA). Make sure the parts
fit together and use a phillips screwdriver to
tighten all parts at this time. Adjustments can
be made before tightening.
Hardware Used
AA
M6x12mm Bolt
Phillips Screwdriver
(not included)
5
x 4
x 4
G
6
x 4
B
x 4
7
B
F
H
G
x 8
6
L
I
A
J
C
L
Publicidad
Tabla de contenido
