Frequently Asked Questions And Operating Guide - mabe RMS1540Z Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

frequently asked questions and operating guide

Problem
Probable Cause
Power Fault.
Low voltage (this can be noticed
Refrigerator
by the bulb lights flickering in
isn't working
the house).
Defective plug socket.
Disconnected plug.
Damaged supply cable.
Express Chill
You are trying to activate
a function while another is
Zone, Turbo Cool,
and/or Alarm
already activated.
won't activate
You have removed the drink or
Express Chill Zone's
food from the Express Chill Zone
Alarm Function
won't stop
but you haven't deactivated the
sounding
function to turn off the alarm.
Functions display
Lock Function is activated.
won't activate
An inadequate cooling time
has been selected, with too
Express Chill
big a load of goods to
Zone hasn't
be chilled.
cooled the
drinks and/or
foods
The lid of the Express Chill
Zone is open.
A vacuum is created when you
Cooler or freezer
close and try to re-open the
door is dif cult
cooler and freezer doors in
to open
too quick succession.
There is spillage in the
When lling the
water tank.
cylinder, water
spills out when
The water tank is
the door is open
overflowing.
or close.
The dispenser has not been
The water from
filled by pure drinking water.
the water
dispenser
The dispenser has not been
tastes unusual.
filled cleaned.
The water tank has been
cleaned with detergents and
odorous cleaning products.
The water dispenser is not
used regularly.
What to Do
* Check the energy supply.
* Make sure that the plug is properly connected to
the socket.
* Check the mains fuse.
Install an automatic voltage regulator with a
minimum power of 500 Watts and a minimum
current of 10 Amps.
Plug another device into the socket to check it,
and change the plug if necessary.
Connect the plug.
Call an authorised service centre.
Deactivate the activated function, and then
select the one you wish.
Press the Express Chill Zone Function to stop
the alarm sounding.
Deactivate the Lock Function to be able to
activate the functions display.
Cooling times vary in accordance with the size
of the load of drinks or foods, and their initial
temperature. As a result, it is recommended that you
select the same time again or an option of even
more time, and leave until your items have the
desired temperature reached.
Close the lid of the Express Chill Zone and
reprogramme the time.
1.- Wait a few minutes for the vacuum
pressure to dissipate (don't try to open it
immediately).
2.- Open the freezer door first, and then the
cooler door.
It is possible that the seal tank has not been
located in the correct position.
Do not fill the container to the top.
The maximum water level is marked on the
cylinder.
The dispenser must be filled by pure
drinking water.
Clean the tank for the first time of use, and
it is recommendable to clean it every 30 days.
Don't use detergents or odorous cleaning
products.
If you don't use your water tank frecuently
throw the water, and clean the system.
99

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido