Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning Your SpinWave
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
WARNING
Do not set the machine on carpet, rug, or other fabric surface when mop pad is removed as
hook and loop material on foot may damage them.
WARNING
Do not store machine on wet mop pads as they may damage wood or other delicate floors.
1
Turn machine OFF
and unplug the
machine from the
grounded outlet.
4
Wrap cord around
the Quick Release™
Cord Wrap and the
Lower Cord Wrap.
Clip molded plug to
power cord.
NOTE: Any solution remaining in the clean water tank should be emptied prior to
machine storage.
STORE CLEANER IN A PROTECTED, DRY AREA. SINCE THIS PRODUCT USES WATER, IT MUST NOT BE
STORED WHERE THERE IS A DANGER OF FREEZING. FREEZING MAY DAMAGE INTERNAL COMPONENTS
AND VOID THE WARRANTY.
2
To remove mop pads,
simply pull pads off the
hook and loop material
on the bottom of the
machine.
5
™
3
Machine wash separately in warm
water. Use only liquid detergents.
Do not use bleach or fabric
softener. Tumble dry on low. Do
not iron. Do not dryclean.
Store upright in a dry
protected area until the
next use. Since this product
uses water, it must not be
stored where there is danger
of freezing. Freezing will
damage internal components
and may void the warranty.
Store with dry mop pads.
Wet mop pads may damage
wood and other delicate,
sealed hard floors.
www.BISSELL.com
9
Publicidad
