Hose Connections - AquaTools AT5800 El Manual Del Propietario

Step 10: Connect Hose to Cleaner.
Connect the hose cuff of the 20' hose to the swivel
assembly in cleaner (correct end of hose is marked).
Fill the cleaner with water and let it sink to the bottom.
Verify hose connections as shown below, and that gate
valves are fully open in the suction line.
Figure 11
Follow drawing that most closely resembles your skimmer installation.
Water
A
Level
Vacuum
Regulator
Reducer
Cone
Skimmer
Port
Gate valve for
skimmer must
be fully open
INSTALLATION
Hose Cuff
marked
"Connect
to Cleaner"
1875 0795

HOSE CONNECTIONS:

Figure 12
Vacuum
B
Regulator
with Cap
Reducer
Cone
Skimmer
Gate valve for
vacuum port must
be fully open
5
Water
Level