SW24.W
SCA output operating mode
Gate closed: off
Gate open: on fixed
Gate closed: off
Gate moving: intermittent
Gate open: on fixed
Indeterminate position: intermittent
pause of 1 s every 5
Gate closed: off
SCA
Gate opening slow intermittent
Gate open on fixed
Gate closing intermittent
Indeterminate position: intermittent
pause of 1s every 5
Gate stopped on fixed
Gate moving off
Gate closed off
Gate moving on fixed
Input configuration
Sub
Description
menu
C1/C2/C3/C4 command input
Step-step (PP)
The step-step control:
- with the gate stopped and
closed, opens the gate
- in opening, stops or closes the
gate according to the step-step
logic setting (L10)
- with the gate stopped after open-
ing, closes the gate
- in closing, stops or opens the
gate according to the step-step
logic setting (L10)-with the gate
stopped after closing, opens the
gate
Pedestrian (PED)
C(X)
Opens the gate to the pedestrian
position
It acts like a step-step if the com-
mand is given with the gate in a
position beyond the pedestrian
position
Open (OPEN)
The open command:
- with the gate stopped and
closed, opens the gate
- in opening is ignored
- with the gate open, resets the
pause time
- with the gate stopped, opens the
gate
- in closing, opens the gate
20
(1)
Close (CLS)
The close command:
1
- with the gate stopped and
- in opening, closes the gate
2
- with the gate stopped, closes the
- in closing is ignored
Timer (TIM)
C(X)
The timer command:
- when closed, opens the gate
3
- when the contact is released it
4
Pedestrian Timer (TIMP)
Has the same function as the timer
5
command but on the pedestrian
position
Values
S1/S2/S3/S4 safety input
(default)
Off
Photocell closing (PHC)
The closing photocell:
- with the gate stopped, allows the
- in opening does not intervene
- with the gate open, does not al-
1
(C1)
- in closing, reopens the gate im-
Photocell (PH)
The photocell:
- with the gate stopped, does not
- during opening stops the
S(X)
2
- with the gate open, does not al-
(C2)
- in closing stops the movement
Opening photocell (PHO)
The opening photocell:
3
- with the gate stopped, allows the
(C3)
- in opening, recloses it completely
- with the gate open, allows it to
- in closing does not intervene
EN
closed, is ignored
gate
and keeps it open as long as the
contact remains closed
closes the gate
gate to open
low it to close and when released
will reset the pause time
mediately
allow the gate to open
movement and when released
proceeds with opening
low it to close and when released
will reset the pause time
and when released reopens the
gate
gate to open
close and does not reset the
pause time
4
(C4)
5
6
OFF
(S3 S4)
1
(S1)
2
(S2)
3