Troubleshooting - Steinbach 061340 Modo De Empleo

2. Remove the batteries from the outdoor and indoor unit.
3. Completely charge the rechargeable battery in the sun.
4. Switch off the solar light.
The solar light must not start to illuminate if it is shaded.
5. Place the product in the original packaging box.
If you no longer have this box, use a similar container with a matching size.
6. Place this manual and all parts that were included inside the box.
7. Store the product in a dry and frost-free location (≥ +5 °C) without direct sunlight.
The product is properly packaged and stored.

Troubleshooting

Error
Temperature display shows "HH.H".
Temperature display shows "LL.L".
Temperature display shows "--.-".
Temperature display shows "--.-".
Temperature display shows "--.-".
Temperature display shows "--.-".
The solar light does not illuminate in
the dark.
If the problem cannot be solved, contact the customer service listed on the last page.
Possible cause and solutions
The measurement values are above the measuring range.
The measurement values are below the measuring range.
The signal from the outdoor unit is not being received.
- see "Manual transmitter search"
The batteries of the outdoor unit are dead.
- see "Inserting or changing batteries"
There is too much distance between the outdoor unit and
the indoor unit.
- Position the stations closer to each other (max. 60 m/
65 yds.).
Incorrect channel is set on the indoor unit.
- see "Manual transmitter search"
The solar light is not switched on or the rechargeable
battery is not charged.
- see "Solar light"
27