Main Specifications - HiWeigh SUPER Serie Manual De Usuario

! Don't make mistake of AC power voltage – be careful of 120V or 240V.
! Please recharge the scale on time to protect the battery, and replace it if it runs out of life.
! The battery needs to be recharged every 3 months if it's not used for long time.
! The replaced battery must be handled correctly.
! Please use the scale on the stable floor or platform.
! Please don't overload the scale

1. MAIN SPECIFICATIONS

Model
Capacity
Min.
Test Division
Display Division
Max.Tare
Accuracy
Pan Size
Working Temperature :
Storage Temperature:
Power:
Net Weight:
Protection:
2. KEYBOARD
ON/ZERO
TARE
OFF
SET/0-9
3. INDICATION MESSAGES
dc x.xx: Means the voltage of battery is x.xx V.
------:
The weight is over than 100%FS+9e, with the sound of beeping it means overload,
reduce the weight.
-AdC-: As the A/D converting overflowing, display shows this with the sound of beeping.
-bAtLo-:
The voltage is lower than 5.8V, please charge it immediately.
C_End:
Recharge is end.
Err-0: Load cell wrong connected or A/D error
Err-1: No power (battery voltage lower than 5.6V) / CAL switch off
Err-2:
Set weight alarm error / no enough sample (counting mode)
Err-3: Calibration weight is too small.
4. OPERATIONS
4.1. PREPARATION
Adjust the base foot, watch the level, make the pan in horizontal.
4.2. TURN ON AND OFF
WSS/SUPER USER MANUAL
WSS3 WSS6
SUPER3 SUPER6
3kg 6kg
1g 2g
0.2g 0.5g
-5-+35℃
-25-+ 50℃
6V4Ah rechargeable battery – 90hrs
3.6kg/pc
IP68
Turns the scale on and zero.
Tare key
Power off
Functions set
2
WSS15
SUPER15
15kg
20e
5g
1g
100% F.S.
Class III
190x230mm
WSS30
SUPER30
30kg
10g
2g