TOYAMA TDWE 8 Guia Del Propietario página 9

•
Adjust the speed - control lever knob to the "START" position indicated on
the panel. Move the fuel priming lever back and forth until you notice a
"jolt" action of the fuel injector (Fig.5).
Cooling water:
Use fresh water to clean just like rainwater. Place on the radiator / evaporator until
the red ball of the float rises to its upper position (Fig.6). Never use dirty water or hard
water like well water. In case you need to use hard water in a particular condition, a
treatment should be performed by simply boiling and precipitating the water before use.
Otherwise, the salts in the water can block the water passages or damage the radiator.
The cooling water in the radiator should be changed regularly and be free of foreign
matter and dirt..
9