Operation - Klarstein 10031343 Manual Del Usuario

1 POWER-LED - Power Led
2 LF-LED - Low-fan Led
3 HF-LED - High-fan Led
4 SET-LED - Set-Led
5 TIM-LED - Time-Led
6 SW-LED - Swing-Led
7 ION-LED - Ion-Led (Optional)
8 W.F-LED - Water full-Led
A Power Push Button
B Fan Speed Push Button
C Adjustable Humidity Push Button
D Timer Push Button
E Louver settings Button
F ION Button (Optional)
User Panel
The Power indication light will turn on in green when the unit is plugged in, regardless of whether
1
the unit is operating or not.
Press the button once to start operation, the default humidity level is 60%. Press it again to stop
2

operation.

Press button as follows: Press to set the desired fan speed. It can be adjusted between high speed
3
and low speed.
Press to set the desired humidity level in the room. When the relative humidity in the room is
4
lower than the selected humidity, the operation of the unit will stop automatically.
Press the button to program the time when the unit turns on and turns off. If you want to cancel
the timer programming, press the button to adjust the time at 00, and press the button ,it will be
5 circulate from 00-01-02......23-24. It is the programmed time to switch the machine. The pro-
grammed time will be cancelled when to switch compressor manually each time. The program-
med time remains unchanged if the machine stops to wok due to water full or during defrosting
Press to set the louver settings the indication light.
6
When press button the Ion function will be open and the indication light. (Optional)
7
11
Operation