Evenflo Top-of-Stair PLUS Instrucciones página 3

8. Swing the gate into the closed position and slide the gate panels until the gate contacts
the latch side of the mounting surface.
E
9. Making sure that the top of the gate is level with the floor, using a pencil
mark the position for the holes for the latch housing
10. Swing the gate out of the way, and remove the latch housing.
11. Drill holes as in Step 4. Using the correct screws (see Step 5), secure the upper latch
housing to the mounting surface.
D
12. Slide the lower latch housing over the lower gate rail.
13. Using a pencil, carefully mark the position for the holes of the lower latch housing.
14. Open and swing the gate out of the way. Remove the lower latch housing from the rail.
15. Drill holes as in Step 4. Using the correct screws (see Step 5), secure the lower latch
housing to the mounting surface.
16. To close gate, place the lower rail into the lower latch housing, while squeezing the
C
latch , insert it into the upper latch housing
C
17. Test the gate:
A
D
B
the upper latch housing
IMPORTANT: The end of the bottom rail
the top rail
the bottom rail is disengaged.
C
E
E , carefully
.
D
.
D
upward to unlock;
A
and lower latch housing
B
is slightly longer than
E
D . Before attempting to swing the gate open, make sure
2
A
B
Metal and plastic parts can be wiped clean with a soft, damp cloth and dried with a soft cloth.
or solvents.
An occasional drop of vegetable oil may reduce wear and tear on moving parts.
For a period of 90 days from the original purchase of this Product, Evenflo warrants to the original end user ("Purchaser") this
Product (including any accessories) against defects in material or workmanship. Evenflo's sole obligation under this express
limited warranty shall be, at Evenflo's option, to repair or replace any Product that is determined to be defective by Evenflo and
determined to be covered by this warranty.
Repair or replacement as provided under this warranty is the exclusive remedy of the Purchaser. Proof of purchase in the form of
a receipted invoice or bill of sale evidencing that the Product is within the warranty period must be presented to obtain warranty
service. This express limited warranty is extended by Evenflo ONLY to the original Purchaser of the Product and is not assignable
(800) 233- 5921 or www.evenflo.com.
;
C
The optional swing control mechanism provides extra security.
the gate from swinging into a hazard such as over stairs or into a
#10 x 1/2" Screws
heavy traffic area.
1. Mount the gate according to instructions.
2. Determine the direction you want to prevent the gate from
swinging.
3. A
surface of the swing stop toward the direction of the hazard,
i.e. the direction you want to prevent the gate from swinging.
4. The optional swing control mechanism should not be used in
close the gate.
using the gate. Remove the gate from opening when not in use.
USA: 1-800-233-5921, 8 AM – 5 PM E.T.
Canada: México: 01-800-706-12-00
3
to the top rail B with the solid
use abrasive cleaners