Protecting The Environment; Cleaning And Maintenance; Replacing The Filters - BLACK&DECKER Dustbuster NV19 Manual Del Usuario

ENGLISH
Leave the appliance to charge for at

least 16 hours.
Note: Whilst charging, the charger may
become warm. This is normal and does
not indicate a problem. The appliance can
be left connected to the charger
indefinitely.
Warning! Do not charge the battery at
ambient temperatures below 4 °C or
above 40 °C.
Switching on and off (fig. D)
To switch on, slide the on/off switch (1)

forward.
To switch off, slide the on/off switch

back.

Cleaning and maintenance

Warning! Regularly clean the filters.
Cleaning the dust bowl and filters
(fig. E & F)
The filters are re-usable and should be
cleaned regularly.
Remove the dust bowl (2) by turning

counterclockwise.
Empty the dust bowl.

Remove the filter assembly (8) by

twisting them counterclockwise.
Wash the filters in warm, soapy

water. The bowl can also be washed
if necessary. Do not immerse the
appliance in water.
Make sure the dust bowl and filters

are dry.
Refit the filter assembly (8) onto the

appliance twisting it clockwise until it
locks into place.
Refit the dust bowl onto the

appliance. Make sure the dust bowl
clicks into place.
Warning! Never use the appliance
without the filters. Optimum dust
collection will only be achieved with clean
filters and an empty dust bowl.
Replacing the filters
The filters should be replaced every 6 to
9 months and whenever worn or
damaged. Replacement filters are
available from your Black & Decker
dealer (cat. no. VF60).
6
Remove the old filters as described

above.
Fit the new filters as described

above.

Protecting the environment

Z
Separate collection. This product
must not be disposed of with
normal household waste.
Should you find one day that your
Black & Decker product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
z separate collection.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you
purchase a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
any authorised repair agent who will
collect them on our behalf.
You can check the location of your
nearest authorised repair agent by
contacting your local Black & Decker
office at the address indicated in this
manual. Alternatively, a list of authorised
Black & Decker repair agents and full
details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com