Taurus HB1000X Manual Del Usuario página 9

ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed regulator control (A). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
TURBO FUNCTION:
- The appliance has a Turbo function. By acti-
vating the Turbo function all the power of the
motor becomes available, thus obtaining a finer
finish in the final texture of the product.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by releasing the pressure
on the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
ACCESSORIES:
STICK BLENDER ACCESSORY (FIG.1):
- This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food ...
- Attach the stick to motor body by pressing until
you hear a click (Fig.1.1).
- Put the food to be prepared in the jar and
switch the appliance on.
- Detach the stick to motor body by pressing the
buttons. (Fig.1.2).
CHOPPING ACCESSORY (FIG.2):
- This accessory is used to chop vegetables or
meat...
- To avoid damage to the appliance, remove
bones, nerves, cartilage, etc. from the meat.
- Fit the adapter fitting to the motor unit by press-
ing until you hear a click (Fig.2.1).
- Put the food to be prepared in the chopping
container and attach the cover until you hear a
click (Fig.2.2).
- Be careful: do not switch the appliance on if the
whole unit is not properly fitted and connected
together.
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid, and release the
adapter fitting.
- Note: Do not work with turbo dunction with this
accessory attached.
WHISK ACCESSORY (FIG.3):
- This accessory is used to whip cream, beat
egg whites...
- Insert the whisk into the adapter fitting. Join
this unit to the motor unit by pressing until you
hear click (Fig.3.1).
- Put the food into a large receptacle and switch
the appliance on. For best results, turn the
whisk clockwise.
- Remove the whisk accessory and release the
adapter fitting.
- Note1: Do not work at high speeds with this ac-
cessory attached, as this would cause defects
in the whisk (spinning its wires).
- Note2: To free the whisk from the adapter
fitting, pull the ring on the whisk.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- The following pieces may be washed in a dish-
washer (using a soft cleaning program):
- Measuring cup.
- Chipper (without cover)
- Whisk (without adapter fitting)