Akitio MyCloud Duo Guia De Inicio Rapido página 5

MyCloud Duo
2.1.3 Local or remote login via web browser
The network drive can be accessed via web browser from the local network or remotely.
1. Open your web browser (e.g. IE, Firefox, Safari).
2. Go to http://www.myakitio.com.
3. Your default home server name is the MAC address of your network drive. You can find
this number on a sticker either on the retail packaging or the device itself.
4. Select your preferred language, enter the name of your home server and click Enter.
5. Login to your account. The default user name and password for the administrator is admin.
For security reasons, we strongly recommend changing the password after the first login.
Note
To make it easier to remember the name of your home server, login using the web interface
and go to the Registration menu. There you can register the device under a new name.
Login via web portal works no matter where you are, as long as you have a web browser and
an internet connection. No additional set up for your network switch or router is required.
2.1.4 Local login using the iSharing finder (internet access is not required)
The iSharing finder tool can be used to locate and access the network drive on your local network.
For the download and more details, go to http://wiki.myakitio.com/login.
1. Make sure that the network drive is connected to the same local network as your computer
and the power is turned on.
2. Wait at least 15 seconds after turning on the device and then start the iSharing finder. It will
automatically search for the device but if it does not find it at first, click Rescan to start the
search again and make sure the program is not being blocked by the firewall.
3. Once the device has been located, select it from the list and double-click on it to open the
login page in your web browser. By default, the user name and password is admin. For
security reasons, we strongly recommend changing the password after the first login.
2
3
[4]
Getting Started
1