Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Press POWER to power on the unit, the yellow status indicator will be on, then the unit will turn to radio status
automatically.
•
Manual Tuning: Press BACK or NEXT and then release within 1 sec.
•
Auto Tuning:
•
Press PLAY/PAUSE button about 2 seconds, the yellow indicator light will become twinkling and the radio
will start auto search channel. In general, in can be search about 10~30 channels.
•
After the search is done, the yellow indicator light will stop twinkle and keep bright. The unit will start
play the channel that auto saved during auto search.
•
Press BACK or NEXT to select desired channel station.
•
Press [VOL-] or [VOL +] to adjust the volume level.
•
The radio frequency last tuned will be stored in the speaker memory.
•
To turn off the radio, press POWER button or press FUNCTION button to select another mode.
The unit is designed to play MP3 audio files contained in a USB key, if the files are not in MP3 format, the files cannot
be read correctly.
•
Press FUNCTION to select USB mode.
•
Insert one USB key; the status indicator will light on in yellow. The unit will read the USB and playback automati-
cally.
•
Navigate through your library in the common way, usinng Play/Pause, Stop and the next/back buttons.
The auxiliary input of your BT speaker allows you to connect an external source and play its content through SP-5
speakers.
•
Connect your external audio equipment to the AUX INPUT JACK (13)
•
Press FUNCTION to select AUX.
•
To adjust the sound level press VOLUME buttons.
Note: The unit cannot control the player.
•
The operational range between this unit and a BT device is approximately 10 meters.
•
Before you connect a BT device to this unit, familiarize yourself with the BT capabilities of the device.
•
Compatibility with all BT devices is not guaranteed.
•
Any obstacle between this unit and a BT device can reduce the operational range.
•
Keep this unit away from any other electronic device that may cause interference.
•
Press FUNCTION to select the BT mode. The status indicator flashes blue to indicate an attempt coupling is under-
way.
•
Enable the BT function of your BT audio source device to make it discoverable (see your device's operation instruc-
tions to add or setup a BT device). Select SP-5 on your BT device to make the pairing.
•
Enter default password "0000" if necessary and required by the External BT audio source.
•
Once your BT speaker paired with a BT device, the status indicator lights continuously in blue and two beeps con-
firm that the pairing is complete.
•
Navigate through your library in the common way, usinng Play/Pause, Stop and the next/back buttons.
Radio
USB
Aux
BT
8
Publicidad
Tabla de contenido
