Dometic ACX3 Serie Instrucciones De Uso página 25

ACX3
!
WARNING!
Replace the hose when it is porous or when the national conditions
require it.
2. Connect the ACX3 30 or ACX3 40 cooler to the gas hose (fig. 9, page 7) and
the gas cylinder (fig. 0, page 8).
!
WARNING!
Never check for leaks with an open flame or near sources of ignition.
3. Check all connections with leak spray.
There are no leaks at the connections if no bubbles form.
Replacing the gas cylinder (ACX3 30 and ACX3 40)
!
WARNING!
• Replace the gas cylinder in a well-ventilated location.
• Ensure that there are no open flames in the vicinity.
• Only replace the gas cylinder when the device is switched off.
1. Completely close the valve on the gas cylinder.
2. Unscrew the pressure regulator from the cylinder.
3. Check the condition of the hose.
4. Replace the hose if the material is brittle or porous.
5. Connect the hose to the gas cylinder (fig. 0, page 8).
Connecting a gas cartridge to the cooler (ACX3 40G)
!
WARNING!
• Observe the handling and storage instructions for the gas cartridge.
• Make sure that the ports on the cartridge and the cooler are free of
dirt.
I
NOTE
The cooler is suitable for operation with self-sealing gas cartridges of the
type CAMPINGAZ CP250.
EN
Operation
25