Starting The Engine; Important; Rules For Safe And Effective Operation - Briggs & Stratton BRUTE 7800583 Manual Para El Operador

22” autopropulsado cortacésped walk behind
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation (Continued)

Starting the Engine

WARNING: The blade will rotate
when the engine runs.
IMPORTANT: Before you start the engine, operate the engine
stop lever several times. Make sure the engine stop cable
moves freely.
Note: The engine design does not include a throttle control or an
engine speed adjustment. The engine is set at the best speed for cut-
ting grass, bagging grass, and for extended engine life.
1. Check the oil.
2. Fill the fuel tank with regular unleaded gasoline. Make
sure the gasoline is clean. Leaded gasoline will increase
deposits and shorten the life of the valves.
Note: Do not use gasohol or methanol. Do not use premium unlead-
ed gasoline.
WARNING: Always use a safety gasoline
container. Do not smoke when adding gasoline
to the fuel tank. When inside an enclosure,
do not add gasoline. Before you add gasoline,
stop the engine and let the engine cool for
several minutes.
3. Make sure the spark plug wire is connected to the spark
plug.
4. Make sure the drive lever is in the disengaged position
(B, Figure 15).
WARNING: To prevent an accident, make sure
the drive lever is in the DISENGAGED posi-
tion. When the drive lever is in the ENGAGED
position, do not start the engine.
5. The primer button (A, Figure 16) is on the right front of
the engine. Push the primer button. Every time you push
the primer button, wait two seconds. For the number of
times required to push the primer button, see the engine
manufacturer's instructions.
Note: Do not use the primer button to start a warm engine.
Note: Models equipped with Ready Start
primer button. See the engine manufacturer's instructions for further
information.
engines do not feature a
TM
A
Figure 16: The engine primer button
6. Stand behind the mower. Use one hand to hold the
engine stop lever in the operating position (A, Figure
17). Use the other hand to hold the recoil-start grip (B).
7. Make sure the recoil-start rope is not obstructed or
caught between the upper and lower handles. Rapidly
pull the recoil-start grip. Slowly return the recoil-start
grip.
8. If the engine does not start in 5 or 6 tries, see the
"Problem and Repair" Instructions.
Figure 17: Starting the engine

Rules for Safe and Effective Operation

Refer to the 'Operator Safety' section of this manual for
important rules concerning safe and effective mower
operation.
A
B
13

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Brute 7800661Btxp226750hwBtpd22625

Tabla de contenido