Publicidad
Idiomas disponibles
Idiomas disponibles
6. Start-up
After installing the heater in your car, connect the device to a 230V AC socket. To
start it, turn the „on/off switch" on the front of the unit to position „I" or position
„II", depending on the heating level you want to use.
7. Overheating
Normally, overheating only occurs if one of the heater's openings is blocked or
clogged. This unit has a non-self-resetting thermal fuse. As soon as the overhe-
ating temperature is reached, the heater switches off automatically. Operation
of the heater cannot be resumed until the user resets the unit independently.
Proceed as follows:
1.
Unplug the unit from the power outlet and wait until the unit has cooled
down completely.
2.
Once the unit has cooled down, you can plug it back into the power outlet.
The fan heater will then work as usual.
8. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair or
alteration to the device not carried out by the original supplier, will invalidate the
warranty or guarantee. The product may only be used by persons who have read
and understood these instructions. The device specifications may change without
any separate prior notice to this effect.
20
English
Publicidad
