L.B.White Bertha 500 Manual Del Usuario E Instrucciones página 10

10
Bertha and Industrial Torches
L.P Gas Installation Requirements
■ Ensure all L.P. gas containers are secured and
protected from people, vehicular traffi c and
contact.
■ DO NOT invert LP gas containers or lay them on
their side.
■ L.P. gas containers must be located on a fl at,
level, and stable surface.
■ L.P. gas cylinders (100 cylinders/tanks) must be
secured from tip-over.
■ Contact your local authorities, L.P. gas dealers, or
fi re marshal for specifi cs dealing with installation
in your area.
5. Light according to instructions within owner's
manual.
6. This torch includes a POL fi tting with excess
fl ow valve. The excess fl ow valve is a safety
device which protects against discharge from the
propane gas supply container if the POL is broken
off from the torch when in operation. If the POL
fi tting is replaced, it needs to be replaced with
an L.B. White POL fi tting. Failure to do so can
result in fi res, explosions, loss of property, injury
or death.
7. Propane torches are confi gured for use for
propane vapor withdrawal only. Do not use the
torch in a propane liquid withdrawal system or
application. If you are in doubt, contact L.B.White
Company.
8. Take time to understand how to operate and
maintain the torch by using this Owner's Manual.
Make sure you know how to shut off the gas sup-
ply to the torch. Contact your fuel gas supplier if
you have any questions.
9. Any defects found in performing any of the service
or maintenance procedures must be eliminated
and defective parts replaced immediately. The
torch must be retested by properly qualifi ed ser-
vice personnel before placing it back into use.
Owner's Manual • Bertha and Industrial Torches