Crosschek™ Inspection System Safety Warnings; Description, Specifications And Standard Equipment; Description; Specifications - RIDGID CROSSCHEK Manual Del Operador

CROSSCHEK
Inspection System
Safety Warnings
WARNING
This section contains important safety
information that is specific to these
tools.
Read these precautions carefully before
using the RIDGID ®
tion System to reduce the risk of electri-
cal shock or other serious personal in-
jury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the equipment for use
by the operator.
• Do not use with pressurized hoses.
Connect and disconnect pressure-free
hoses only. Pressurized hoses can whip,
causing striking and other serious injuries.
Always turn OFF the compressor and
bleed all air before connecting or discon-
necting hoses.
• Do not use in the presence of energized
electrical systems. This will reduce the risk
of electrical shock.
• Do not operate in explosive atmos-
pheres, such as in the presence of flam-
mable liquids, gases, or dust. Tools can
create sparks which may ignite the dust or
fumes.
• Always use appropriate personal pro-
tective equipment while handling and
using the CROSSCHEK Inspection Sys -
tem. Appropriate personal protective equip-
ment always includes safety glasses, and
may include equipment such as gloves,
face shields, goggles, protective clothing,
respirators and steel-toed footwear.
• Follow instructions on proper use of
this equipment. Do not use for other pur-
poses. Other uses or modifying this equip-
ment for other applications may increase
the risk of serious injury.
• Read and understand the instructions
and warnings for all equipment being
used including boring tools, cameras
and reels before operating the CROSS -
CHEK Inspec tion System. Failure to follow
all instructions and warnings may result in
property damage or serious personal injury.
™
CROSSCHEK™ Inspec -
CROSSCHEK
™ Inspection System
The EC Declaration of conformity (890-011-
320.10) will accompany this manual as a sep-
arate booklet when required.
If you have any question concerning this
RIDGID ® product:
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com or
www.RIDGID.eu to find your local
RIDGID contact point.
– Contact RIDGID Technical Services De -
part ment at rtctechservices@emer -
son.com, or in the U.S. and Canada call
(800) 519-3456.

Description,

Specifications and
Standard Equipment
Description
The RIDGID ® CROSSCHEK Inspection Sys -
tem is designed for use with the SeeSnake
microDrain™, nanoReel, microReel and rM-
200 In spection System. It is used to inspect the
straight bores produced by pneumatic under-
ground piercing/boring tools.
The CROSSCHEK Inspection System mounts
to the camera head and pushrod. Once a
bore is completed, the air hose is attached to
the CROSSCHEK Inspection System and
used to pull the camera head through the
bore for inspection. Once the inspection is
completed, a rope is used to retrieve the unit
from the bore and pull the utility to be in-
stalled into place.

Specifications

Bore Capacity
nanoReel ...............1
microDrain, microReel &
rM-200....................2" to 3" (50 to 75mm)
Inspection Length....Based on SeeSnake
Dimension ...............1
Weight
CROSSCHEK unit
only ........................1.4 lb (0.63 kg)
3 / " to 3" (45 to 75mm)
4
Diameter
Diameter
System
1 / " D × 25 1 / " L
2 4
(38mm D × 641mm L)
®
1