Connecting With A Computer; Cleaning And Care - auna TT-Pure Precision Manual De Instrucciones

EN
24

CONNECTING WITH A COMPUTER

• Connect this record player to a computer using a commercially-
available USB cable to convert audio signals from a record to digital
data and send them to the computer.
• Turn the computer on: confi rm that the operating system is working
correctly. Turn the record player on.
• When they are connected, the computer will automatically detact this
unit's USB port and identify it as "USB Audio CODEC".
• Turn the computer on: confi rm that the operating system is working
correctly.
• Turn the record player on.
• When they are connected, the computer will automatically detect this
unit's USB port and identity it as "USB Audio CODEC''.
• To record audio from this record player using a computer, you must fi rst
install software that can be used for audio recording on the computer.
Please download the software: Audacity as attached.
• Install Audacity software in your computer.
• Open the software.
• Click Append Record icon in the software: the encoding is going on. -
When fi nish the encoding, click STOP icon.
• Open the Files icon in the software and save the project.
• The project can be exported in MP3 or other audio format as you like.
Reminder: When in encoding, please always select LINE mode, then you
can record a better-quality resource.

CLEANING AND CARE

• If the surface of the unit gets dirty, wipe it with a soft cloth or use
diluted mild liquid soap. Allow the surface of the unit to dry completely
before using.
• Do not use chemical cleaning cloths, thinner or similar substances as
they could damage the surface or the unit..
Warning: Danger of electric shock
For safety, turn the device off and disconnect the power cord from
the socket before cleaning.