GE IM-4D Manual Del Propietário página 4

Before you call for service...
Troubleshooting Tips
Save time and money! Review the following chart first
and you may not need to call for service.
Problem
Automatic icemaker
does not work
4
Possible Causes
Freezer compartment
too warm.
Icemaker is not turned on.
Icemaker is not plugged
in correctly.
Water line kinked.
Water supply turned off or
not connected.
Piled up cubes in the storage bin • Level cubes by hand.
cause the icemaker to shut off.
Water valve is not plugged in
correctly.
What To Do
• After installing the kit, allow the refrigerator to completely
cool down for 24 hours. Once the compartment is cool,
the icemaker will begin ice production.
• Move the icemaker
power switch to the
ON position.
• Check that the icemaker
cord plug is fully inserted into
the socket. See Plug in
the icemaker.
• Check that the plastic water
line running from the valve
to the water tube inlet is not
kinked. See Connect the
water line. A kink in the
water line will restrict flow
to the water line.
• After installing the kit, make sure the house water supply
to the refrigerator has been turned on.
• Check that the valve wire
adapter is completely
plugged onto the terminals
on the water valve.
See Attach the water valve.
Icemaker
Power
Switch
(Appearance may vary)
Locking
Tabs
Clip Restraints
onto Locking
Tabs
Hook
Adhesive-backed
Fasteners for
Water Tube
Valve Terminals
Adapter
Feeler
Arm