SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Tyco Safety Products Canada Ltd declares that the radio equipment type Wireless Alarm System with Integral
Cellular Alarm Communicator is in compliance with Directive 2014/53/EU.
The following models are covered by this guide: WS900-19, WS900-29, 3G7090, LT7090 (used in North America only),
WS901-14, WS901-24EU, WS901-18, WS901-28 and 3G7090-EU.
The full text of the EU declarations of conformity for the models mentioned below are available at the following internet
addresses:
Model WS901-14: http://dsc.com/pdf/1707001
Model WS901-24EU: http://dsc.com/pdf/1707002
Model WS901-18: http://dsc.com/pdf/1707003
Model: WS901-28: http://dsc.com/pdf/1707004
Model: 3G7090-EU: http://dsc.com/pdf/1707005
Product specifications:
Frequency Bands
g1 433.04MHz – 434.79MHz
h1.4 868.0MHz – 868.6MHz
h1.5 868.7MHz – 869.2MHz
2400MHz-2483.5MHz
EGSM/EDGE: 880MHz – 915MHz
DCS/EDGE: 1710MHz – 1785MHz
FDD Band VIII: 880MHz – 915MHz
FDD Band I: 1920MHz – 1980MHz
European single point of contact
Tyco Safety Products, Voltaweg 20, 6101 XK Echt, Netherlands
The trademarks, logos, and service marks displayed on this document are registered in the United States [or other
countries]. Any misuse of the trademarks is strictly prohibited and Tyco will aggressively enforce its intellectual property
rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. All trademarks not
owned by Tyco are the property of their respective owners, and are used with permission or allowed under applicable laws.
Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all
products include all features. Availability varies by region; contact your sales representative.
Maximum Power
10mW
10mW
100mW
Class 4 (2W) @ 900 MHz, E-GSM
Class E2 (0.5W) @ 900 MHz, EDGE
Class 1 (1W) @ 1800 MHz, DCS
Class E2 (0.4W) @ 1800 MHz, EDGE
Class 3 (0.25W) @ 900/1800 MHz, FDD I/VIII
© 2018 Tyco Security Products
All Rights Reserved.
4