CASCO PF 100 RESCUE Modo De Empleo página 7

E: EAR PROTECTION
Only use ear protectors which have been type approved and authorised for use with your protective hel-
met. For further details and explanatory notes regarding use and special characteristics of the ear-muffs,
please refer to the respective instruction manuals.
F: NECK GUARD
1. Attachment
First place the neck guard's large central flap (A) between the inner and the outer helmet shell at the
back of the helmet and then attach the neck guard to the helmet using the 4 locking pins (B) at the side
(Fig. 6b). The wraparound flap must be secured between the inner and outer helmet shell.
2. Removal
First release the 4 locking pins (B) on the side by gently moving the neck guard backwards and forwards,
then pull out the large central neck guard flap (A) out of the well at the back of the helmet (Fig. 6c).
G: ERVICE LIFE/ MONITORING SERVICEABILITY
The helmet absorbs the energy of a (hard) knock (or impact) along with partial damage or destruction
of the helmet. Even if damage is not evident, every helmet should then be replaced. The full protective
function can no longer be entirely ensured. The same is true if a helmet no longer fits properly.
The CASCO PF 100 Rescue has a very long service life – no binding discard or expiry date. The service
life is dependent on those causative factors or conditions of service to which it has been exposed. Since
the shock-absorption parts of the interior construction are not overtly subject to external influences, we
recommend precautionary helmet replacement after 10 years.
CARRY OUT REGULAR VISUAL CONTROLS AND SPECIFICALLY IN CASES OF PARTICULAR OCCURRENCE.
This helps to identify any reduction in helmet performance!
H: STORAGE
Protective helmets are to be stored away from sunlight in a cool, dry spot. Avoid direct exposure to sun-
light to prevent possible damage through UV rays.
I: PACKAGING AND TRANSPORT
The helmet is individually packed and delivered ex-factory. This can be used for transportation.
J: GUARANTEE
Your helmet comes with a 24-month guarantee for material or production faults under normal conditions
of use. CASCO repairs, replaces or refunds at its own discretion. A condition for filing a warranty claim is
free-to-factory delivery of the helmet. The helmet must not have been altered from its original condition
and/or been damaged by wrongful use in any way.
K: HELMET LABELLING
All protective helmets are furnished with production date, type, size and European standard specification
and the symbol for optional safety related requirements. The labelling can be found on the front inner
side of the helmet shell.
12
HELMET LABELLING
EN 16471:2014
Document number European standard
EN 16473:2014
EN 1385
CASCO Name and identification code of manufacturer
08.100.13 Identification code of helmet model PF 100 Rescue
*** Low temperature classification (fulfils the requirements -30 °C)
Details on size, helmet shell material, securing system etc.
can be found in the instruction manual
2015/3
Year of manufacture/month
M (56-59)
Helmet type size
PF 100 Rescue Manufacturer's code for helmet type
~ 500 Gramm Weight of helmet type
OVERVIEW OF CHEMICALS TESTED FOR ON HELMET AND EQUIPMENT PARTS
Chemical concentration (% by weight)
Sulphuric acid 30 (hydrous solution)
Sodium hydroxide 10 (hydrous solution)
p-Xylene undiluted
Butane-1-ol undiluted
n-Heptane undiluted
MATERIALS OVERVIEW
HELMET PART Material
Outer shell ABS (Ronfalin flame-retardant)
Inner shell (shock-absorbing shell) EPS
Micro shell Polycarbonate
Securing system (webbing/straps) 15 mm PES strap
Belt buckle POM
Interior fittings
Disk fit TPE
Head band PA velour
Sweat band PA foam
Mesh PE
MANUFACTURER´S INFORMATION
This documentation contains information on the state of the technology at the time of going to press. We
reserve the right to make technical improvements and deviations to comply with altered standards. Errors
and omissions excepted.
EC type approval test: Administrative body:
DGUV Test-, Prüf-, und DGUV Test-, Prüf-, und
Zertifizierungsstelle Zertifizierungsstelle
Fachausschuss Personliche Fachausschuss Personliche
Schutzausrüstung (PSA) Schutzausrüstung (PSA)
Zwergenberger Str. 68 Zwergenberger Str. 68
D-42781 Haan D-42781 Haan
Kennnummer: CE 0299 Kennnummer: CE 0299
Subject to technical alterations. No guarantee is given or implied for errors and printing errors
Manufacturer: Sales:
S.C. CASCO Group scs CASCO International GmbH
Parc Industrial Sud F.N. Gewerbering Süd 11
RO-440247 Satu Mare D-01900 Bretnig
Tel.: +49 (0) 35955 839-0
Fax.: +49 (0) 35955 839-99
e-Mail: info@casco-helme.de
www.casco-helme.de
13