Troubleshooting - Rubi SCRAPER-250 Manual De Instrucciones

12.
– Switching on: Push the on/off switch (3) forwards.
– Switching off: Push the on/off switch (3) backwards.
The stroke rate can be set to 3 levels:
– Slide the On/Off button (3) forwards = higher stroke rate;
– Slide the On/Off button (3) backwards = lower stroke rate.
WORKING INSTRUCTIONS
WARNING!
Risk of cutting!
Never work towards your body. Never place your hands in
front of the immediate working area.
Note:
The stroke motion of the tool is triggered by the
pressure on the workpiece.
• Hold the device with both hands.
• Introduce the scraper blade in the tile grout in the direction of
the grout when it is already switched on.
• The first tooth guides the device along the grout.
• The second tooth must go into the tile grout, so it can remove
it.
• Use a low pressure and scrape at a low angle.
• Use speed 1 with blades for 1,5 mm grout. For the rest of
blades, the user can choose the speed according to the need.
• Keep the blade always perpendicular to the surface of work.
• If the blade is blocked or trapped into the grout do not force it.
Extract it making slight tilting movements in the same direction
of the tile grout.
ACCESSORIES
Accessories and their corresponding order number can be found
in our catalogues.
MAINTENANCE AND CARE
DANGER! Risk of injury!
Pull out the power plug before conducting any work on the tool.
Cleaning overview
Regularly and according to the operating conditions.
What?
Clean the ventilation slots of
the motor to remove dust.
Clean the device.

TROUBLESHOOTING

What to do when something doesn't work...
DANGER!
Risk of injury!
Unprofessional repairs may mean that your unit will
no longer operate safely. This endangers you and your
environment.
English
TRANSLATION OF ORIGINAL
How?
Use a vacuum, cleaning brush
or paint brush.
Wipe the unit with a damp
cloth.
In many cases, small defects can lead to a malfunction. You will
usually be able to deal with these yourself. Please refer to the table
below before contacting your local RUBI store. This may save
you a lot of effort and quite often money.
Error/Fault Cause
No power
supply?
Cause Device
does not work.
Is the device
defective?
Tool not
suitable for
the material?
Performance too
low.
Tool is worn?
After-sales service
Use only accessories and original spare parts supplied by
the manufacturer. Repairs should only be carried out by an
accredited workshop or RUBI technical support:
GERMANS BOADA SANTA OLIVA
Ronda de l'Albornar, 24-26
43710 Santa Oliva
Tarragona (Spain)
Tel: +34 977 16 90 50
WARRANTY
See general warranty conditions printed at the end of the manual.
DISPOSAL
WARNING! Do not dispose of electric tools in the
household waste!
In accordance with European Directive 2012/96/EC relating to old
electrical and electronic appliances and its translation into national
law, used electric tools must be collected separately and recycled
in an ecologically desirable way.
Disposal of the packaging
The packaging consists of cardboard and correspondingly marked
plastics that can be recycled.
– Make these materials available for recycling.
Remedy
Check the cable, plug,
and the fuse.
Contact your local RUBI
store.
Fit an appropriate tool.
Inserting the tool