Faucet Installation - sanindusa 540637111 Instrucciones De Montaje

1º
step
remove all mounting hardware
1 – Shut off water supply and remove the hexagonal nut,
the disk and the gasket. Do not remove the O-ring from
the base of the faucet.
2º
step
installing the faucet
1 – Place the faucet with the O-ring into the hole in the
deck or lavatory. make sure the O-ring is located between
the deck or lavatory and the bottom of the faucet.
2 – Slide the gasket over the flexible hose(s).
3 – Secure the faucet to the deck or lavatory with the
hexagonal nut and the disk.
3º
step
connecting the water supply
1 – Connect the flexible pipe to the water supply. For mixer
models, connect the red flexible pipe to hot water supply and
the blue flexible pipe to the cold water supply.
2 – Make sure that the filter(s) is (are) installed between the
flexible pipe(s) and shut off valve(s) (angle valve/s)
(not supplied).
3 – Turn on the central water supply and the shut-off valve(s)
(angle valve/s).
4 – Check for leaks.

//FAUCET INSTALLATION

O-ring
M IXER
flex hoses
filter adapters
and back checks
filters
filters
shut-off
valve