Warranty Notice - ANSMANN APS2250L Manual De Instrucciones

CAUTION: Incorrect polarity may destroy the device to be powered, so the incorrect
polarity must not be used, even for a short time to check!
4.) Set voltage for the equipment / OPERATION
Check the voltage (V) required for the equipment to be powered. Set the required
voltage with the rotary switch [3] by using the key [2] and connect the power supply
to the mains once the equipment to be powered has been connected. If you do not
know the required voltage, start with the lowest voltage and gradually increase it
until the connected device works. In this case no claim for damage can be accepted,
as ideally the correct voltage should be set according to the equipment's instructions.

WARRANTY NOTICE

We hereby offer a 3 year warranty on this power supply. This does not apply to dama-
ge caused by improper handling (e.g. incorrectly set polarity or voltage). ANSMANN
cannot accept liability for direct, indirect, accidental or other claims or consequential
damages originated by using this power supply and information given in these ope-
rating instructions.
Technical details subject to change without prior notice. No liability accepted for typo-
graphical errors or omissions. 10/2009