Technical Data; Important Safety Instructions - Facom BSYS.TK Manual De Instrucciones

WARNING: To reduce risk of injury or property damage, read the assembly instructions entirely
and carefully before assembling or using your FACOM ToughSystem
System product .
WARNING: This product is intended as a Do It Yourself (DIY) product. Do not attempt this
installation without a basic understanding of the contents within these assembly instructions .
If you are not confident about locating or anchoring the ToughSystem
System to the wall and floor, do not attempt this installation and seek the help or advice of
someone who is .

Technical Data

Specifications per Racking System (assembled)
Height
Width
Depth
Weight
Load Capacity (max.)
Per Pair of Brackets
Per Racking System
* All stated weight limits are based on static loads with evenly distributed loads, as stated above . Some horizontal
distortion can be expected when racks are loaded at maximum limits .
DANGER: The workshop storage rack is not rated for use in moving vehicles . NEVER install
workshop storage rack in any moving vehicle .
WARNING: Do not exceed maximum load capacity of storage rack or maximum load capacity
of brackets .

Important Safety Instructions

1 . Read these instructions .
2 . Keep these instructions in an accessible location for future reference .
3 . Pay attention and follow all warnings .
4 . Follow all instructions .
5 . Make sure you read and understand all safety warnings and instructions . Failure to follow the
warnings and instructions may result in personal injury or damage to the product .
6 . Anyone who may be exposed to the ToughSystem
understand the information in this manual .
NU-BSYS.TK_0317.indd 21
®
180 cm (5 ft. 11 in.)
65 cm (25.6 in.)
30 cm (12 in.)
15 kg (33 lb.)
30 kg (66 lb.)
200 kg (440 lb.)
Workshop Racking System should read and
®
EN
Workshop Racking
Workshop Racking
®
21
06/04/2017 14:17:50