Publicidad
Idiomas disponibles
Idiomas disponibles
Lubricants:
Greases up to consistency 2 (NLGI / Class 2 to DIN 51818) can be used.
Pastes with no lubricating properties (with an abrasive content) or silicon pastes must not be used.
Recommendation:
To limit the maximum air pressure and to increase the life of the pump it is an advantage to install a
maintenance unit in the air feed to the pump.
Order Ref. No. for maintenance unit: 39 902 20
Maintenance:
For the operation of pneumatic pumps the fitting of an upstream compressed air maintenance unit
(Order Ref. No. 39 902 20) is always recommended
Make a regular check on the pressurised components (pressure hose and oil filler gun) and also on
the live parts of the pump for possible damage.
Defective parts must be replaced with genuine spares without delay.
Warranty:
If the operating instructions are complied with and the equipment used in accordance with the
directions, we accept liability within the bounds of the statutory warranty obligation.
When making warranty claims always attach the invoice from your dealer, giving the date of purchase.
Your contribution to protecting the environment:
The pertinent regulations for the registration, setting up and operation of equipment for dealing with
materials hazardous to water must always be complied with by the user.
10
Publicidad
