Installation Steps; Care And Cleaning - LUND Interceptor Instrucciones De Instalación

Installation Steps

Set the hood shield in place, sliding outer tabs UNDER the hood
3
Insert (2) fasteners through the holes in the seal and
hood shield and into the holes in hood.
hood seal
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
the utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made
every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
seals.
hood shield
Lund International, Lund Accessories Division
300 Horizon Drive, Suwanee, GA 30024
800-328-5863 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
Using a phillips screwdriver install (2) screws with (2)
4
Install bump ons at pre-cleaned locations on the
6
®
branded products offered by Lund International, Inc. We take
Page 2 of 2
washers through the hood inserts.
square hole
hood
hood insert
hood shield
grommet
screw
DO NOT OVER TIGHTEN
painted hood/fender surface.