Publicidad
2.15 Post Status Checker (PSC)
Post Status Checker (PSC) diagnoses the computer when users power on the ma-
chine. It emits a red light to indicate whether the CPU, memory, VGA or storage is
dysfunctional. The lights go off if the four mentioned above are functioning normally.
2.16 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.17 Installing Windows
RAID Functions
If you want to install Windows
/ SATA2 / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
RAID mode is not supported under Windows
50
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
ASRock Z77 OC Formula Motherboard
TM
TM
/ Vista
64-bit With
TM
TM
/ Vista
64-bit on your SATA
®
XP / XP 64-bit.
Publicidad
