BSVILLAGE PISCINE DIAMOND Manual De Uso Y Montaje página 4

The unit may be easily connected to the water supply network via the neck of shower fitting (1/2") found at the rear lower part
of the shower body. The external water supply line should be attached to the shower body before opening the supply valve.
Only then the water supply valve can be opened.
The standard inlet fitting of the shower shall be neither removed nor modified. One shall take into account the inlet fitting and
the shower body are connected using plastic parts. That is why no excessive force should be applied when connecting the
shower to the water supply line or domestic pumping unit. Tighten the connections using only the force of your hands. Any
connections shall be made using standardised, approved and undamaged water fittings only.
After connecting the solar shower to the water source fill the shower body (reservoir) completely with water at simultaneous
venting. Open the supply valve and the shower system (turning the valve handle to the position of OPEN warm water flow) and
let it fully open until water begins to flow continuously from the shower head. Then press the control lever to the CLOSED
position. Now the solar shower is ready for use. Finish the assembly by inspecting all connections for possible leaks.
Maintenance and Wintering
The Diamond garden solar shower does not require any special maintenance.
Keep the solar shower clean, particularly its decorative glass cover and protect its surface from any deposition of scale. The glass
cover received special treatment to minimize scale deposition and occurrence of stains on its surface.
After the end of summer season disconnect the solar shower completely from water supply, and drain water from the system
after removing the plug from the draining neck found at the rear lower part of the shower body. When unscrewing the plug,
hold the neck firmly to prevent it from loosening. For the period of storage ensure that the control (mixer) valve and shower
heads are dry. Pack them in an airtight wrapping to be protected from moisture. Any so treated solar shower may be left
outdoors even in winter.
However, for the period of winter it is recommended to store the product at a dry place protected from frost.
Transport and Storage
In order to protect the product from damage and loss of its particular parts the original delivery may be unpacked not earlier
than immediately before erection of the solar shower.
Content of Delivery
- Shower body
- Input water pressure/flow reducing device
- Inlet hose quick coupler
- Manual for Installation and Use
Solar Shower Basic Parameters
Solar shower reservoir volume: 50 litres
Maximum permitted pressure of supply water at system inlet: max. 3 bar (without any pressure reducer)
Maximum permitted pressure of supply water at system inlet: max. 6 bar (with the pressure reducer supplied)
Body height: 2100 mm
Support anchoring plate: 4 holes of ø 9 mm, with the pitch of 162x311 mm
Conditions of Warranty
Provided that all and any conditions of use have been observed as required by the manufacturer, the manufacturer shall grant
the 24 months warranty for this product.
The manufacturer shall accept no liability for any defect and/or damage caused by incorrect product assembly, use or wintering.
Mountfield a.s., Česká republika
The manufacturer, GARSYS, s.r.o., reserves the right to make product changes.
Country of origin: Czech Republic
DE
Beschreibung
Die Gartensolardusche besteht aus einer Duschsäule aus Aluminiumprofil, deren Ummantelung als Warmwasserspeicher dient
und gleichzeitig als Sonnenkollektor funktioniert. Diese Ummantelung ist selbsttragend. Die Armaturen für Wasserleitungen
befinden sich im Inneren der Duschsäule.
Solar Gartendusche DIAMOND
Gebrauchs- und Montageanleitung
Version 01 / März 2017
3