Craftsman CMXGZBF7124441 Manual De Instrucciones página 5

inStrUCtiOnS fOr CmX mODeL trACtOrS
Step 1: (fig. 1)
1. Attach an angle support bracket to the top holes in the
quick attach brackets using two 3/8" x 1" hex bolts (D)
and 3/8" flanged lock nuts (Y). Do not tighten.
2. Attach an angle support bracket to the bottom holes in
the quick attach brackets using two 3/8" x 1" hex bolts
(D) and 3/8" Nylock Nuts (M). Do not tighten.
Fig. 1
3/8" x 1"
HEX BOLT (D)
BEND
FACES
IN
Step 2: (fig. 2)
1. Assemble the pivot support bracket to the slotted
angle support brackets using four 3/8" x 1" hex bolts
(D) and Nylock Nuts (M). Do not tighten yet.
2. Tighten the 4 bolts fastening the slotted angle
support brackets to the quick attach brackets.
Tighten the 4 bolts fastening the pivot support
3.
bracket to the slotted angle support brackets
4. GO TO PAGE 7.
Fig. 2
3/8" x 1"
HEX BOLT (D)
3/8" NYLOCK
NUT (M)
BEND
FACES
OUT (23)
3/8" NYLOCK
NUT (M)
PIVOT SUPPORT
BRACKET
Step 3: (fig. 3)
1. Assemble a shoulder bolt (I) and a 3/8" nylock nut (M)
to the front of the tractor frame on each side, unless a
shoulder bolt is already present.
Fig. 3
Step 4: (fig. 4)
1. Pull out on the attachment pins of the hitch assembly
and swing the top of the pins down away from the
holes they were in.
2. Hook the hitch assembly onto the shoulder bolts in the
side of the tractor frame.
3. Align the holes in the hitch assembly with the holes in
the tractor frame. Insert the attachment pins to lock
the hitch assembly in place.
4. gO TO FIgURE 19
Fig. 4
ATTACHMENT PIN
SHOULDER BOLT
EnglIsh
3